Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to make Analog to HDMI Converter

Status
Not open for further replies.

Dhaval Shah

Junior Member level 3
Junior Member level 3
Joined
Sep 24, 2010
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,554
hi.

I want to make Analog to HDMI converter.

does any one did same before??

please suggest me the cheapest IC and any reference schematic for same.

your help is appreciated.

thanks..
 

Hi,

I never did this before.

I would say you will need two chips

A HDMI transmitter and an analog frontend.

For the HDMI transmitter you can use a silicon image chip
Silicon Image Products - HDMI Transmitters
or NXP
NXP Semiconductors[i=55186]|pp=[t=pfp,i=55186]
or Analog Device
Analog/HDMI/DVI Interfaces | Audio/Video Products | Analog Devices

all of them use digital RGB or YUV data as an input.

So depending on which analog (e.g. CVBS-Video or VGA or ...) you need to select a different analog frontend.
e.g. this one may not be the cheapest, but supports several input formats
http://www.analog.com/static/imported-files/data_sheets/ADV7441A.pdf

regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top