xpress_embedo
Advanced Member level 4
- Joined
- Jul 5, 2011
- Messages
- 1,154
- Helped
- 161
- Reputation
- 396
- Reaction score
- 189
- Trophy points
- 1,353
- Location
- India
- Activity points
- 10,591
Hello!!!
I want to make an SD Card reader where the content of my memory card is displayed as a Mass Storage Device when connected to PC.
I also want that my Mass Storage will show the manufacturer names according to my choices.
like on connecting pen drive, it must display like this "my name" found like this
This can be made by a mmc card and a usb controller, as i am having some good knowledge of pic micros.
So i started it by using pic18f2550 Micro-controller.
Here is that thread
https://www.edaboard.com/threads/285417/
Till now not succeeded.
As EDA Board is giving pen drive to the members who helped most in a particular month, so please help me to complete my project.
I want to make an SD Card reader where the content of my memory card is displayed as a Mass Storage Device when connected to PC.
I also want that my Mass Storage will show the manufacturer names according to my choices.
like on connecting pen drive, it must display like this "my name" found like this
This can be made by a mmc card and a usb controller, as i am having some good knowledge of pic micros.
So i started it by using pic18f2550 Micro-controller.
Here is that thread
https://www.edaboard.com/threads/285417/
Till now not succeeded.
As EDA Board is giving pen drive to the members who helped most in a particular month, so please help me to complete my project.