V
v_naren
Guest
bjt library pspice
hello members
I want to make my own NMOS and PMOS and NPN and PNP libraries in Orcad 9 so that I can use the schematic editor and build any circuit based on these models and do "neat" step by step schematic entry followed by simulation.
For example
I have following data for a NMOS and PMOS
(taken from page 37 from Razavi)
LEVEL 1 SPICE MODEL
NMOS:-
LEVEL=1 VTO=0.7 GAMMA=0.45 PHI=0.9 NSUB=9e+14 LD=0.08e-6 UO=350 LAMBA=0.1 TOX=9e-9 PB=0.9 CJ=0.56e-3 CJSW=0.35e-11 MJ=0.45 MJSW=0.2 CGDO=0.4e-9 JS=1.0e-8
PMOS:-
LEVEL=1 VTO=-0.8 GAMMA=0.4 PHI=0.8 NSUB=5e+14 LD=0.09e-6 UO=100 LAMBA=0.2 TOX=9e-9 PB=0.9 CJ=0.94e-3 CJSW=0.32e-11 MJ=0.5 MJSW=0.3 CGDO=0.3e-9 JS=0.5e-8
Now can someone please help me make a nice symbol in Orcad which has its pspice model based on the above parameters?
I have made NPN and NMOS and PMOS and PNP before usibng Orcad 9 myself but now I am having some problems.
It would be extremely useful if someone could just give the step by instructions....I read the pdf files that come with Orcad and there seems to be some serious mistakes in their instructions for making what I want
Some one please help me
kind regards
Naren
hello members
I want to make my own NMOS and PMOS and NPN and PNP libraries in Orcad 9 so that I can use the schematic editor and build any circuit based on these models and do "neat" step by step schematic entry followed by simulation.
For example
I have following data for a NMOS and PMOS
(taken from page 37 from Razavi)
LEVEL 1 SPICE MODEL
NMOS:-
LEVEL=1 VTO=0.7 GAMMA=0.45 PHI=0.9 NSUB=9e+14 LD=0.08e-6 UO=350 LAMBA=0.1 TOX=9e-9 PB=0.9 CJ=0.56e-3 CJSW=0.35e-11 MJ=0.45 MJSW=0.2 CGDO=0.4e-9 JS=1.0e-8
PMOS:-
LEVEL=1 VTO=-0.8 GAMMA=0.4 PHI=0.8 NSUB=5e+14 LD=0.09e-6 UO=100 LAMBA=0.2 TOX=9e-9 PB=0.9 CJ=0.94e-3 CJSW=0.32e-11 MJ=0.5 MJSW=0.3 CGDO=0.3e-9 JS=0.5e-8
Now can someone please help me make a nice symbol in Orcad which has its pspice model based on the above parameters?
I have made NPN and NMOS and PMOS and PNP before usibng Orcad 9 myself but now I am having some problems.
It would be extremely useful if someone could just give the step by instructions....I read the pdf files that come with Orcad and there seems to be some serious mistakes in their instructions for making what I want
Some one please help me
kind regards
Naren
