Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to isolate an RS485 connection

Status
Not open for further replies.
B

berni80

Member level 2
Member level 2
Joined
Jun 28, 2008
Messages
47
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,627
How to isolate an RS485

Hi,

which is the easyest way to isolate a RS485 connection?
I've a board with a standard rs485 transceiver to convert into an isolated link..
Any ideas?

Thanks
 

I believe you can buy galvanic isolation RS-485 parts.
Try Analog Devices, Linear Tech and TI with those keywords.
 

HI

Maxim also have some product in this filed - or you can use a MAX485/LTC485 with an optocupler on the digital side

See maxim application note for implementation

All the best

Bobi
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top