how to interface both RTC DS1307 and SD CARD to PIC18f452

Hello all,
im am trying to make a data logger to save temparature of 8 different places(i.e 8-channel)
i have selected pic 18f452 so tat i have lot many pins to interface multiple seven segment display(say 16)
i need to take the temparature inputs and display them on seven segment display and simultaniously save them to sd card with time recording of temp instance.

i have separately found the codes and worked on them separately for interfaing all the units
but i am using spi interface which needs the pins 17,18,23,24.i have attched the circuit here
and to interface rtc ds1307 this is the circuit diagram


now i have to connect them at a time and i am confused since these oth use same pins pin 23 and 16...how shud i interface them both at a time

im stuck at this point and not able to go ahead

please help me.

thanks.

abhi

Its example from dr. Dogan Ibrahim book called "SD-Card Projects using PIC". Check book author gives source codes for every project.



See this project:

microSD ATmega32 Data-Logger (ATMega32 8ch ADC Temp-Voltage)
https://www.dharmanitech.com/2011/05/microsd-atmega32-datalogger.html





You can adjust all 8ch for temp sensor.

:wink: