Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to increase the inverter's delay time Td?

Status
Not open for further replies.

incol

Full Member level 2
Full Member level 2
Joined
Jan 18, 2005
Messages
143
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
1,077
inverter td

the inverter I use is push pull inverter, does increase the pmos and nmos's resistance?
 

yes. you can add a cap,too
 

you can increase the length of inverter and decrease the width . Then the delay of the inverter is longer.

Yibin.
 

By adjusting rising and falling of the inverter, you can control the delay.


The rising and falling can be adjust using capacitor or W or L of the transistors

Suria
 

You are usually better off to design the overall system so you do not need these tweaks. Process variations (and in the discrete circuit case different lots of parts) will always combine in sneaky ways to ruin your best laid plans.
 

u can increase the delay time by increasing the load capacitance .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top