hello,
herewith i am attaching the scahmatic of pwm here i get the variable voltage from 0 to 5v but i am not getting my current requirment is the 100mA.so how to increase the current??
i would like if you provide me the information with schematic.
thanks.
read datasheet: is PIC capable of driving 100mA and keep an eye on the voltage.
increasing current:
* the simplest way is to just add a MOSFET or BJT.
* or complete halfbridge
* or driver IC...
it depens on what you need.
* min voltage, at max sink current
* max voltage at max source current
* frequency
* what load: completely resistive, capacitive, inductive
* min duty cycle
* max duty cycle