Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to improve the testing accuracy of VA-VB

Status
Not open for further replies.
L

leehying

Member level 3
Member level 3
Joined
Aug 2, 2008
Messages
59
Helped
6
Reputation
12
Reaction score
3
Trophy points
1,288
Activity points
1,552
Hi, all.
Since the tested VA is VA+-e1, VB is VB+-e2,
Assume e1=e2, the voltage i wanted VA-VB = VA-VB +- 2*e.
If VA-VB is small, the testing error is unacceptable.

Is there some method, can improve the testing accuracy of
the difference of two voltage?

Thanks for any advice.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top