How to import board station cell.hkp to expedition library

[Logiks]

Hi,

I have tried to import the board station cell.hkp into expedition pcb2005.1 .
But cell.hkp format not support in expedition library.

both plotform file extension(.hkp) is same. but not support.

can any one help me to solve this issue.

Thanks in advance...
Logiks

 

[Logiks]

Re: How to import board station cell.hkp to expedition libra

[

Hi Guys,


Could you please relply me on below requet.

This is very very urgent for me ....

Thanks,
LOgiks













quote="Logiks"]Hi,

I have tried to import the board station cell.hkp into expedition pcb2005.1 .
But cell.hkp format not support in expedition library.

both plotform file extension(.hkp) is same. but not support.

can any one help me to solve this issue.

Thanks in advance...
Logiks[/quote]

 

[edaedaeda]

You need to use the translators that can be downloaded from mentor.

Another way you might be able to do this is:
If you have boardstation RE do the following:

define the variable mgc_allow_exppcb_on_re_db with a value of 1.

Variable= mgc_allow_exppcb_on_re_db
Value= 1

This will allow you to open an RE (boardstation) project using expedition 2005. If it has not already been done you would have to create an RE database out of boardstation. If you are able to do this you would simply export hkp data from expedtion 2005. One thing you need to do in library manager when importing is to always import padstacks first.


Eda

 

[Logiks]

Re: How to import board station cell.hkp to expedition libra

Thanks for the reply .

Could you please expalin where is the Variable= mgc_allow_exppcb_on_re_db available in board station.

I am new to board station.

Please help me as soon as possible.

Thanks
Logiks








______________________________________________________________

You need to use the translators that can be downloaded from mentor.

Another way you might be able to do this is:
If you have boardstation RE do the following:

define the variable mgc_allow_exppcb_on_re_db with a value of 1.

Variable= mgc_allow_exppcb_on_re_db
Value= 1

This will allow you to open an RE (boardstation) project using expedition 2005. If it has not already been done you would have to create an RE database out of boardstation. If you are able to do this you would simply export hkp data from expedtion 2005. One thing you need to do in library manager when importing is to always import padstacks first.


Eda

 

[Logiks]

Re: How to import board station cell.hkp to expedition libra

Hi Eda


I am new in board station and I have RE viewer only .

Is it possible to define variable in RE viewer and where is I need to place.

Please explain this is very very urgent me...

I am looking forward to receive the reply soon from you....

Thanks
Logiks

 

[edaedaeda]

RE viewer will not work. But if you can use RE viewer to view this database then the RE data has already been created!

The variable I had mentioned is an environment variable that is part of your operating system.



Eda

 

[Logiks]

There is no way to directly import board station cells to expedition library.