How to get started with CPLD/FPGA?

Status
Not open for further replies.
K

kieennx

Junior Member level 3
Joined
Jul 8, 2005
Messages
29
Helped
3
Reputation
6
Reaction score
2
Trophy points
1,288
Activity points
1,613
Hi all,
This is not a new question but my experience about CPLD/FPGA is almost zero. All concepts and comments that you discuss here are very new for me. So can someone show me some ways to get closer? How can I start researching about CPLD/FPGA?
Thanks a lot.
 

Hello,


Go through good books on VHDL/Verilog programming first...then
study the FPGA Architecture details...




Here the couple of freely available tools to learn the same...
http://www.aldec.com/downloads/

Verilog Tutorial
Evita-Verilog is an interactive Verilog primer that provides a comprehensive overview of the Verilog language, complete reference guide, over 130 examples and a series of questions and answers at the end of each chapter.

VHDL Tutorial
Evita-VHDL is an interactive VHDL primer that provides a comprehensive overview of the VHDL language, complete reference guide, over 150 examples and a series of questions and answers at the end of each chapter.

and
http://www.xilinx.com/


---manju---
 

    K

    kieennx

    Points: 2
    Helpful Answer Positive Rating
you had better make a pcb .then study and download example provided by Xilinx
 

Buy the "High Volume Starter Kit Bundle" from Xilinx for only $99 US. It includes an FPGA board, a CPLD board, cables, manuals, and a CD full of development tools. Try some of the example projects.
**broken link removed**
 

start with examples in vhdl or verilog and simulate it and then go for cpld/fpga
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…