ruwan2
Member level 5
- Joined
- Nov 29, 2011
- Messages
- 90
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 2,141
Hi,
There is a PLL verilog-AMS model. Now it works in the simulation with sine input signal, i.e. the output sine phase tracking input signal source phase. I would like to see what output will be for a square wave input. I know that a large magnitude sine wave passing a limiter will be a square wave. Yes, I can code it with several line code. Are there other ways for the requirement? I would like to know some easier ways may be out there.
Thanks,
There is a PLL verilog-AMS model. Now it works in the simulation with sine input signal, i.e. the output sine phase tracking input signal source phase. I would like to see what output will be for a square wave input. I know that a large magnitude sine wave passing a limiter will be a square wave. Yes, I can code it with several line code. Are there other ways for the requirement? I would like to know some easier ways may be out there.
Thanks,