how to find model parameter value in UMC 180 nm

Status
Not open for further replies.
S

satya193

Newbie level 6
Joined
Nov 26, 2012
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,342
How to find Vth,cox,mobility of mos in UMC180nm in cadence spectra
 

Run a dc analysis. The go to 'Results'-> 'Print"-> 'DC operating point'. Then select the corresponding transistor in the schematic.
 

thanx but i do not find Cox there. plz let me knon about this....
 

Run a dc analysis. Then go to 'Results'-> 'Print"-> 'Model Parameters'. Then select the corresponding transistor in the schematic. To calculate the Cox value you need to use tox(thickness of oxide).
Cox=E0*Er/tox
E0=8.854e-11F/m
Er=3.9 for SiO2
and Tox u can find in the listed parameters.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…