tony_lth
Advanced Member level 5
- Joined
- Jul 28, 2010
- Messages
- 2,098
- Helped
- 377
- Reputation
- 756
- Reaction score
- 369
- Trophy points
- 1,363
- Location
- Beijing
- Activity points
- 12,727
Hi, Gurus,
I want to optimize main lobe beamwidth in HFSS, but I don't know how to express it in Ansys HFSS.
In the results of HFSS, I can create a chart to display gain vs theta (@phi=0 & 90deg).
I can read the beamwidth from the 3db points of the gain curve.
But when I want to set the beam width as the HFSS opt target, I don't know how to expressing it in the optimization setting.
Any help or comments is grateful.
Best,
Tony Liu
I want to optimize main lobe beamwidth in HFSS, but I don't know how to express it in Ansys HFSS.
In the results of HFSS, I can create a chart to display gain vs theta (@phi=0 & 90deg).
I can read the beamwidth from the 3db points of the gain curve.
But when I want to set the beam width as the HFSS opt target, I don't know how to expressing it in the optimization setting.
Any help or comments is grateful.
Best,
Tony Liu