Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to enable interrupt in ECp ?

Status
Not open for further replies.
A

aamiralikhoja

Member level 5
Member level 5
Joined
Aug 11, 2004
Messages
90
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
708
Ecp interrupt

to enable interrupt in ECp is it neccsearry to use same method to enable interrupt as in SPP ie enable bit 4 of the control register, Enable IRQ Via Ack Line.and enable irq7 in PIC .ie enable bit 4 of the control register, Enable IRQ Via Ack Line.and enable irq7 in PIC .
or only to enable ECP Interrupt Bit, (Bit 4) of ECR
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top