How to eliminate EMC/EMI issues from a 100 MHz board?

Status
Not open for further replies.
G

gkrahul

Newbie level 1
Joined
Apr 20, 2006
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
Hi,

I am some EMC/EMI issues in one of my board, which works at 100MHz. Especially in the oscillator area. Can any one suggest some ideas to eliminate?

Thanks,
gkrahul
 

Re: Ground plane rules

Hi,

try to check the following points :
1. Check any of the traces crossing the split planes under the routing layer.
If yes, re-route and avoid the crossing.
2. Change the traces from top or bottom to internal layers.
3. pour the copper under the component and provide via to link with the ground , if body need to be grounded for the oscillator.

I hope above suggestions will be useful for you to enhance the performance and reduce the risk of EMI.

GK
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…