-=[-=[
Newbie level 1
- Joined
- Jun 11, 2008
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,293
Hi experts,
My Sharp LC-37GX3W stopped to work, and according to the error code, something is wrong in the main board.
I decided to throw out the whole panel and install the universal (v59) tv board. (no service manual available at all).
After searching in the internet I found this Sharp has a TCON board with dual channel 10 bit LVDS. (5 differential data line + 1 differential synch line) /channel .
However the universal tv board has dual channel 8 bit LVDS interface.
My idea was, just simple connect the A-A, B-B, C-C, D-D, Synch-synch, and just leave open the "E" line in the TCON board.
Is it possible to make this setup work ?
https://obrazki.elektroda.pl/9057981300_1410502006.jpg
https://obrazki.elektroda.pl/4767548500_1410502007.jpg
Also, I have a problem with the R/L, U/D, MV_MODE,ROMSEL1,ROMSEL0, TEMP1, TEMP2, TEMP3, PE, OS_EN, SHIP_EN terminals of the Sharp TCON connector.
I guess the TEMP1,2,3 should be temperature sensor output, so might be I don't need to connect those. but the other pins...........
I would appreciate any link to the service manual of this TV. Seems it is domestic Japanes product, so the service manual is not easily reachable in the web.
Thanks in advance,
My Sharp LC-37GX3W stopped to work, and according to the error code, something is wrong in the main board.
I decided to throw out the whole panel and install the universal (v59) tv board. (no service manual available at all).
After searching in the internet I found this Sharp has a TCON board with dual channel 10 bit LVDS. (5 differential data line + 1 differential synch line) /channel .
However the universal tv board has dual channel 8 bit LVDS interface.
My idea was, just simple connect the A-A, B-B, C-C, D-D, Synch-synch, and just leave open the "E" line in the TCON board.
Is it possible to make this setup work ?
https://obrazki.elektroda.pl/9057981300_1410502006.jpg
https://obrazki.elektroda.pl/4767548500_1410502007.jpg
Also, I have a problem with the R/L, U/D, MV_MODE,ROMSEL1,ROMSEL0, TEMP1, TEMP2, TEMP3, PE, OS_EN, SHIP_EN terminals of the Sharp TCON connector.
I guess the TEMP1,2,3 should be temperature sensor output, so might be I don't need to connect those. but the other pins...........
I would appreciate any link to the service manual of this TV. Seems it is domestic Japanes product, so the service manual is not easily reachable in the web.
Thanks in advance,