How to do Bluetooth ESD Test? How can I know it is fail in the ESD,
To let it work in continue transmit mode and observe if the LED flash?
Please give a direction,tks!
Get 2kV static test source and apply pulses to the places where user can have access(pushbuttons, case, wiring and so on) and see if device is still operating.
1.) Set your Bluetooth module / system into normal operation mode.
2.) Set ESD to 4KV ( contact discharge ) or 8KV ( air discharge ) to test.
For contact discharge, all expose metal contact must test by both ' +ve ' and ' -ve ' charge. 10 sparks per polarity. This is minimum CE requirement.
3.) Your unit should able to work normally after the test described in 2.)