How to determine the capacitance of Microstrip?

Status
Not open for further replies.
N

Naz

Junior Member level 1
Joined
Feb 28, 2005
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,428
MICROSTRIP

Suppose I design a Low Pass Filter for S band and use Microstrip for capacitors ,Will the length of the Microstrip play any role or only Thickness, Height and Permitivity is important...How will I determine the capacitance of the Microstrip?
 

Re: MICROSTRIP

At lower frequencies, you can just use a pad of any shape, and the capacitance will be the parallel plate capaciatance PLUS the fringing capacitance (off of sharp corners, edges, etc).

At higher frequencies, where any dimension is greater than say 0.1λ, you had better at least model the pad as a low impedance transmission line. So a series L, shunt C, lowpass filter... becomes a high impedance, low impedance...series of transmission lines, with a microstrip discontinuity model used where ever the width abruptly changes.
 

Re: MICROSTRIP

Hi,

for some simulators (Eagleware, MW Office, ADS) you have developed libraries of vendors RLCs on a substrate, so all the effects of the substrate and leeds are taken into account. You can then connect those with microstrip lines in the schematics to have 100% real simulations. Just look for Modelitics libraries.

flyhigh
 

Re: MICROSTRIP

Enclosed is the file calculating the length capacitance of microstrip line. Kindly refer the book Microwave Engineering by Pozar. It is taken from this book.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…