Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to design the linear phase wideband filter?

Status
Not open for further replies.

Ye

Newbie level 3
Newbie level 3
Joined
Sep 6, 2005
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,316
I am trying with a linear phase bandpass filter for wideband application(about 400MHz@1.25GHz). And the group-delay turns out no longer flat because of the nonlinearity while doing the lowpass to bandpass transform(i am using Lancast's lowpass prototype). Now i've found out Rhodes developed in his paper"Cascade Synthesis of Selective Linear Phase Filters(CT-19,1972)" a so-called"hyperbolic group delay prototype" to overcome the problem.

However there is no way i can get the right values for the lowpass prototype elements by his formulars and i am not sure where is wrong.

Is there anybody ever tried that kind of filters? Or there is some other to develop the broadband bandpass filter? Please help me out...

Regards
 

Please can somebody whoever has designed microwave linear-phase filters before, give me some advice on a properiate lowpass prototype? maybe without those J-inverters?

Thanks in advance!
 

Ye said:
I am trying with a linear phase bandpass filter for wideband application(about 400MHz@1.25GHz). And the group-delay turns out no longer flat because of the nonlinearity while doing the lowpass to bandpass transform(i am using Lancast's lowpass prototype). Now i've found out Rhodes developed in his paper"Cascade Synthesis of Selective Linear Phase Filters(CT-19,1972)" a so-called"hyperbolic group delay prototype" to overcome the problem.

However there is no way i can get the right values for the lowpass prototype elements by his formulars and i am not sure where is wrong.

Is there anybody ever tried that kind of filters? Or there is some other to develop the broadband bandpass filter? Please help me out...
Regards
You can use: G.Matthaei,L.Young "Microwave filters, impedance-matching networks, and coupling structures". The book is in the attachment module.
 

    Ye

    Points: 2
    Helpful Answer Positive Rating
Dear ,
Try using 2 section , one low pass and the other high pass..and then cascade.
It will help
 

    Ye

    Points: 2
    Helpful Answer Positive Rating
borich_03 said:
You can use: G.Matthaei,L.Young "Microwave filters, impedance-matching networks, and coupling structures". The book is in the attachment module.

What do you mean by 'attachment module'? I have that book by hand, would you pls tell me which part specificly should i look into?

Thanks a lot!

Added after 3 minutes:

grandizer said:
Dear ,
Try using 2 section , one low pass and the other high pass..and then cascade.
It will help

Yes, i remembered read about that kind of structure somewhere..and I will try to find out more about it...Thanks! and do you have any recommendations on the references i should read?
 

Ye said:
What do you mean by'attachment module'?
I mean - Edaboard.com Forum attachments module:

I have that book by hand, would you pls tell me which part specificly should i look into?
Look in Secs. 1.05, 4.07, 4.08, 7.09 of the book, please.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top