How to design on the Radiation Hardened device?

Status
Not open for further replies.
E

EleApollo

Member level 2
Joined
Jul 24, 2003
Messages
50
Helped
9
Reputation
18
Reaction score
1
Trophy points
1,288
Location
milan
Visit site
Activity points
324
How to design on the Radiation Hardened device? any one can give some advisor or matter?

Thx
 

fabs have separate process technology for radiation hardened device fabrication
 

You want to design a Radiation hardened IC or a system using components?
 

It need the hardened device hardened construction.
Some corp can surpport the hardened standard cell library.
GOOD lucky
 

    E

    EleApollo

    Points: 2
    Helpful Answer Positive Rating
hi Designer,

If I understand your question correctly, you want to design a chip which is meeting EMI (electromagnetic interface) standards, if so,

1. Ensure the chip has less Power Grid noise.
2. Ensure the high switching pads placed in the center of the chip so that the leads which connects from the pads are lesser which in-turn causes lesser EMI noise issues.
3. Ensure that you meet your SSN(simultaneous switching noise) standards , which in-turn will help to meet your EMI requirements.

Praise the Lord.

best regards,
vlsichipdesigner
https://www.vlsichipdesign.com
[News/Jobs/Interview Questions/Tech info/Blog/Forum about VLSI]
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…