Hi all,
I want to design a RF AMP.(freq.1900MHz),and how can i define the capacitor value for DC block and inductor value for DC feed? What is the rule to select this type component for DC?
Thanks
John
In general DC blocking capacitor shall behave like a short at working frequency
Calculate the reactance in ohms of the DC blocking capacitor for a minimum value at your working frequency:
Usually Xc(ohms) = 1/(2*3.14*f*C) shall be less than 2 ohms at working frequency.
where
f = frequency in Hz
C = Capacitance in Farad
For example 100pF at 900MHz has Xc = 1.8ohms
Another option for DC blocking cap is to choose a capacitor with SRF at the working frequency.
The RF choke is a circuit element designed to present high impedance to RF energy while offering minimal resistance to direct current.
Usually the choke reactance XL(ohms) = 2*3.14*f*L shall be greater than 500ohms at working frequency.
You also need to look at self resonance frequency of the capacitor also. The operating frequency must be less than self resonance frequency otherwise the capacitor will act as an inductor.
SRF higher would be better as all caps have tolerances. It will ensure that the capacitor has capacitive effects rather then inductive at operating frequency.
---------- Post added at 02:49 ---------- Previous post was at 02:44 ----------
Vfone could you please provide references, I want to quote them in one of my paper. Thanks
You might be able to find language like that in some amplifier cookbook's... but in general, those concepts are something taught in school, and are known to those "skilled in the art" of RF design. They are generally learned from senior designers as a rule-of-thumb by most RF people that I know.
Of course you can determine the circuit values from the fundamental equations, but the "why" is often learned from practice/experience (and it's usually obvious that you don't want to put large, unwanted parasitics into your nice, ideal design).