how to control the motor using PWM in lpc2129

Hi friends,
how to control the motor using PWM in lpc2129.If any body can send the code.I am using 12Mhz crystal.

Hi,

be specific.. what kind of motor are you using (stepper, servo or normal bldc motors)?

- - - Updated - - -

Hi,

be specific.. what kind of motor are you using (stepper, servo or normal bldc motors)?

I am using normal bldc motors.

It is an easy task dear. Are you using any drive or hall sensor for pole positioning and feedback system?
Your input datas ain't enough to know actual problem. What are the hardwares your using there?

This link might help you.

All the best.

**broken link removed**

http://ww1.microchip.com/downloads/en/appnotes/00899a.pdf
http://www.st.com/st-web-ui/static/...ical/document/application_note/CD00041736.pdf

- - - Updated - - -

It is an easy task dear. Are you using any drive or hall sensor for pole positioning and feedback system?
Your input datas ain't enough to know actual problem. What are the hardwares your using there?

This link might help you.

All the best.

http://ficta.in/attachments/article/55/06%20Control%20of%20BLDC%20motor%20with%20the%20help%20of%20%20%20Pulse%20Width%20Modulation.pdf

http://ww1.microchip.com/downloads/en/appnotes/00899a.pdf
http://www.st.com/st-web-ui/static/active/en/resource/technical/document/application_note/CD00041736.pdf