jani12
Advanced Member level 4
I need to configure pin AP0_14 for digital output. To achieve this I need to write 0 to bit 14 of 16-bit Port Mode Register.
The physical address of this register is: 0xFFC103C8
What should be the exact statement to write to this register using the physical address ?
Please see section 2.9.2.4 in attached manual.
The physical address of this register is: 0xFFC103C8
What should be the exact statement to write to this register using the physical address ?
Please see section 2.9.2.4 in attached manual.