How to choose the best RF Connector for Antenna

Status
Not open for further replies.
D

derndinn

Junior Member level 1
Joined
Nov 12, 2013
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
107
What are the principles for choosing Rf connector of each kind of antenna ? Thank you
 

The important issue is what connector is used on your test setup- signal generator, receiver, or a VNA. Impedance may be 50 Ohms, some cases need 75 Ohms, etc.
If your antenna is to be used with a high power, find a connector that can handle it. Operating frequency is also important.

Most test equipment now uses SMA connectors up to 18 GHz, k-connectors up to 40 GHz. There are N-connectors usable to 26 GHz, and many transitions available as needed. Better quality means a higher cost , too.
 
derndinn said:
What are the principles for choosing Rf connector of each kind of antenna ? Thank you
Click to expand...

There are lots of things to consider.

* Coaxial or waveguide flange
* What it needs to mate to, as that is often defined for you.
* Frequency range.
* Power
* Cost
* Is passive intermodulation distortion an issue?
* Is it expected to have many connections/disconnections?
* Permissible return loss.
* Does it need to be water + dust proof, and if so to what level?
 
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…