Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to change cadence schematic background color to white?

Status
Not open for further replies.

hmsheng

Full Member level 4
Full Member level 4
Joined
Dec 17, 2003
Messages
219
Helped
26
Reputation
52
Reaction score
10
Trophy points
1,298
Location
China
Activity points
1,556
changing background color in cadence

How to change cadence schematic background color to white?
We can't see it clearly when project the schematic onto wall with a projector if the schematic has black background.
Thanks.
 

cadence background color

1) Open the .Xdefaults file in edit mode
The .Xdefaults file is your home directory. If it is not there, then create it using xrdb -query > .Xresources
2) Change the "Option Opus.editorBackground: black" to the color you desire
3) xrdb .Xdefaults
4) Invoke the icfb

This will change the background colors of both the Schematic and Layout windows.

It is quite painful but works.
 

cadence background

Teddy said:
1) Open the .Xdefaults file in edit mode
The .Xdefaults file is your home directory. If it is not there, then create it using xrdb -query > .Xresources
2) Change the "Option Opus.editorBackground: black" to the color you desire
3) xrdb .Xdefaults
4) Invoke the icfb

This will change the background colors of both the Schematic and Layout windows.

It is quite painful but works.

Thanks. I try it. But it don't work :-(
No .Xdefaults file in my home directory. So I create one with
xrdb -query > .Xresources (OR xrdb -query > .Xdefaults???)
This is a blank file. I add "Option Opus.editorBackground: white" into it and invoke icfb, NO change!
Please give a detail steps. Thanks again!
 

cadence wavesform background color

You have to restart the xwindows -> log out/ log in
\
Should work - does for me.

Added after 3 minutes:

I just noticed - on my system (HP) I do not have the "Option" word there just:
Opus.editorBackground: #000000


and just for info what you can play with here is a little piece of my .Xdefauls file:

Opus.editorBackground: #000000
Opus.textColor: Black
Opus.attentionTextColor: DarkOrange
Opus.flashColor: Magenta

Opus.background: Gray88
Opus.borderColor: MediumBlue
Opus.recessColor: Gray75
Opus.activeBannerColor: Gray70
Opus.inactiveBannerColor: Gray80

Opus.topShadowColor: #ffffff
Opus.bottomShadowColor: #999999
Opus.buttonColor: #800000
Opus.editorBackground: #000000
! dragColor should set the ruler color
!Opus.dragColor: Red
Opus.dragColor: Yellow

Opus.layerPoolSize: 32,115
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top