gary1943
Newbie level 2
- Joined
- Apr 26, 2012
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,297
Hi, guys,
I am working on using frequency sweeping method to measure the channel frequency response. However, the result is really bad if i dont remove the response of the equipment and the antenna. But to calibrate the response, the best way is to test in a anechoic chamber which only has one line of sight path. There is no such chamber right now for me to use. I also considered to do that in a wide open area like a parking lot. But there are at least two paths including the one reflected by the ground. Did anyone work on the same thing? Any reply will be appreciated.
I am working on using frequency sweeping method to measure the channel frequency response. However, the result is really bad if i dont remove the response of the equipment and the antenna. But to calibrate the response, the best way is to test in a anechoic chamber which only has one line of sight path. There is no such chamber right now for me to use. I also considered to do that in a wide open area like a parking lot. But there are at least two paths including the one reflected by the ground. Did anyone work on the same thing? Any reply will be appreciated.