[SOLVED] How to burn a .hex file to Arduino Nano?

Status
Not open for further replies.
M

milan.rajik

Banned
Joined
Apr 1, 2013
Messages
2,524
Helped
540
Reputation
1,078
Reaction score
524
Trophy points
1,393
Visit site
Activity points
0
How to burn a .hex file to Arduino Nano using AVRDUDESS ?

I burned Bootloader to Nano using AVRISP mk II and powering the Nano from a UNO R3. It worked. I burned a sketch and it also worked. I want to burn a .hex file generated from mikroC PRO AVR to NAno V3.0. How to do it using AVRDUDESS or any other method ?

The AVRDUDESS doesn't show the virtual COMx port used by AVRISP mkII and hence I am not able to burn the .hex file using it to Nano.
 

This example uses the USB port named /dev/ttyACM0. This is the same port that shows in the tools menu of the Arduino IDE. Use the name of the port that shows in your Adruino IDE Tools, Serial Port. This example is from a system running Linux. In windows the USB port usually has USB port name with a com#. This command assumes your nano has a 328 microcontroller.

avrdude -p atmega328p -F -P /dev/ttyACM0 -c arduino -U flash:w:Your_filename.hex
 

Thank you. I am using Windows and my issue is solved. I have used MegunoLink Pro add it is a wonderful program.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…