How to add zener diode in ADS ??

Status
Not open for further replies.
Re: @DS help

Hi

Use a Diode (PN-Junction Diode) and a Diode_Model (PN-Junction Diode Model).
To model a Zener diode, the Diode_Model parameters Bv and Ibv can be used. Bv should be set to the Zener reverse breakdown voltage as a positive number. Ibv is set to the breakdown current that flows at that voltage as a positive number; typically this is in the range of 1 to 10 mA. The series resistance Rs should also be set; a typical value is 1 Ohm.

//alexx
 

Re: @DS help

Hi, I bought a used ds (cause I is broke) and my touch screen has stopped working, is there anything I can do to get it fixed?
 

@DS help

create the model of Z diode first.
 

Re: @DS help

I have no idea what that is
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…