How to add PSPICE model in PSPICE

Status
Not open for further replies.
A

AtMega32

Junior Member level 3
Joined
Nov 11, 2013
Messages
30
Helped
2
Reputation
4
Reaction score
3
Trophy points
8
Visit site
Activity points
277
Can someone tell me how to add PSPICE Model in PSPICE software.

i have downloaded one PSPICE model from "LM239" from texas instrument site, the file they are providing is "LM239.5_1"

https://www.ti.com/product/lm239
 

These are old models where they have different models for different voltages. So, you will see models like 5_1, 10_1, 5_2 etc depending on whether they run on a single or dual supply and how many supply rails there are; single or dual. That model is intended for 5V single supply operation. You can change the extension if you like to .lib or whatever you need.

Keith
 
keith1200rs:thanks buddy for that info,
i have downloaded that file, changed it to .lib and then tried crating library by following this tutorial
https://www.ti.com/lit/an/sloa070/sloa070.pdf

but when using this in circuit, while simulation i am getting error message saying
ERROR(ORPSIM-15108): Subcircuit LM741/NS used by X_U5 is undefined

i have put the created library and model file (.lib and .olb) file in proteus/library and also in captutre/library/proteus/ folder.
and have also added the file as global, in simulation setting.
could you please help me if i am missing something
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…