how to add lumped capacitor in HFSS 9.0

Status
Not open for further replies.
N

newyatin

Newbie level 3
Joined
Mar 10, 2004
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
26
lumped capacitors

I just want to simulate a very simple RLC resonator. It is made of copper wire and a capacitor soldered at the both ends of the wire. How can I add the capacitor in HFSS.
I found there is only lumped RLC boundaries in HFSS which can only be added o a surface, and I really don't know how to handle it.
Thanks for your answer in advance.
 

capacitor in hfss

draw the capacitor by yourself: metal-insulator-metal.
HF$$ is a full 3D simulation software.
 

hfss lumped rlc

I have used a lumped RLC boundary for a wilkinson divider (as a resistance) in HFSS 9 and worked very well...

I just selected the upper face of my microstrip metallization and assigned an RLC boundary. The integration line in the definition of the boundary is setting the points at which the ideal RLC will be soldered (if we can say such a thing ...

Hope this works for you too...

mogwai.
 
capacitor hfss

hi,mogwai.
for divider maybe the way is usalbe.
but in a switch , R or C MODEL in HFSS to equalize the PIN seems difficult . I've tride the way you used in the divider but failed.
maybe you can make a simple test about this ?
 

what is lumped capacitor?

please can anyone say something about this matter

i found that HFSS Help files are not very good

Thank you
 

lumped capacitor

you can draw a two dimensional sheet. Assign it a boundary condition of RLC. then you can assign a capacitance value.
 

how to add capacitors

your can draw a two dimision sheet. Assign a RlC boundary to it. Just notice that the sheet size should be an "electrical small" structure comparing to your simulation frequency.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…