How to add a two ouput voltages i.e., O/P 1 and O/P 2 ?

Status
Not open for further replies.

ishwaryasampath

Member level 1
Joined
Apr 25, 2013
Messages
37
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,506
Hi
Please find the attachment file. The question is " how to add the two output voltages?"
 

Attachments

  • Note.pdf
    49.9 KB · Views: 61

i m not using this application oriented. i m just tried this. The concept is, one bridge rectifier output is 150VDC another one bridge rectifier output is 150VDC.if we need 300VDC, how to add these two outputs.

- - - Updated - - -

And also i have one doubt. the way giving input to the two bridge rectifiers is correct or wrong.
 

You can not add two DC voltages this way, as they are coming from the same AC voltage source. Bridge rectifier does not make it "another " voltage.
Connection of bridge rectifier to transformer is OK.
 

The usual solution is a voltage doubler circuit. https://en.wikipedia.org/wiki/Voltage_doubler

It acts as a combination of two halfwave rectifiers, the output ripple frequency is 50 Hz instead of 100 Hz for the fullwave rectifier and you need double the capacitor values to achieve similar output ripple.
 

Status
Not open for further replies.
Cookies are required to use this site. You must accept them to continue using the site. Learn more…