How the diffuction act as path for charges in antena error

During antena error in metal chargers will accoumulate.
1) those are posive charges or negetive charges???
2) how the diffution can became a path to charges in antena

can any one plz ans dis..??

holla1112 said:

During antena error in metal chargers will accoumulate.

Click to expand...

Right!

holla1112 said:

1) those are posive charges or negetive charges???

Click to expand...

Both are possible. However, metals are mostly structured by negative ions (F^-, Cl^-).

holla1112 said:

2) how the diffution can became a path to charges in antena

Click to expand...

Any diffusion is residing in silicon, i.e. either directly in substrate, or via a junction (even in break down direction this is non-destructive at these low antenna currents).

erikl said:

!
Any diffusion is residing in silicon, i.e. either directly in substrate, or via a junction (even in break down direction this is non-destructive at these low antenna currents).

Click to expand...

can u plz explian more about non destructive..??? how a positive or negetive chagre can go to diffution..??

holla1112 said:

can u plz explian more about non destructive..??? how a positive or negetive chagre can go to diffution..??

Click to expand...

non-destructive means the antenna diode won't be destructed by those small currents from draining-off antenna charges.

The charges captured by the metal antennas are drained-off from metal via contact to diffusion, and via the antenna diode to well resp. substrate.
Consider all silicon areas are connected to GND during the fabrication processes.