Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How the checksum was calculated for these hex strings?

Status
Not open for further replies.

satheeshvelu

Member level 1
Member level 1
Joined
Apr 1, 2008
Messages
38
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,580
Hello,

I need to know how the checksum was calculated for the below hex strings

10 00 00 00 0D 99 03 85 4F AA 5D 33 97 2A 65 CC 2B FF 00 F0 2D
10 00 10 00 00 00 00 00 00 00 00 00 0E 18 93 EB 79 60 1C 17 30

The last 2 digits gives the checksum.

May I know how it was calcualted for the above string?

Thanks in advance.

Satheesh
 

Re: Checksum Calculation

tip: add everything in one line as an 8bit number... final result: ALWAYS 0
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top