How Can I remove spikes from square wave???

Status
Not open for further replies.
J

jay496

Newbie level 6
Joined
Nov 27, 2013
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
77
I am working on VCO I simply used the ring oscillator method.... and giving the control voltage(Vct)

for some control voltages (say vct=0.15) O/P doest have the Full swing :sad:

So I thought of using buffers and have noted the square O/P :-|

But the O/P have spikes :-( how can I remove them

Normal O/p say Vct=0.25


Buffer O/P



Vct=.15


Thanks,
Jay
 

No realistic Load.. I am taking o/p directly... I am using Synopsys( Hspice)
 

Those are likely the result of normal circuit stray inductance and capacitance. Are the spikes a problem or do you just not like them?
 

crutschow said:
Those are likely the result of normal circuit stray inductance and capacitance. Are the spikes a problem or do you just not like them?
Click to expand...

I am asking as it is not looking good for me....

- - - Updated - - -

andre_teprom said:
You need show the circuit diagram in order to allow us provide an accurate hint.


+++
Click to expand...

Actually I am writing the netlist in hspice so no diagram.....

The Figure would be VCO followed by 6 buffers(Inverters)....
 

The suggestion was gave on topic #5:
You need provide the circuit schematic to allow us take some analysis of the possible reason.


+++
 

Hi Jay,

These spikes are related to coupling capacitance between the input and the output of the inverter (Cgd of both transistors). Also, they depend on the capacitance you are driving. Spikes are large, for instance, if you are driving small capacitance with large inverter. If you want to remove them you simply need to decrease sizes of your driving transistors for the same output capacitor or increase the output capacitor. However, you will lose switching speed if you do so (slope), it is a trade-off (as everything in IC design).
 

jay496, did you hear already about "median filtering"?
This rechnique was developped in particular for such cases you have shown in your first post.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…