Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

High Voltage solar MPPT charger

Status
Not open for further replies.
R

Raheelas

Newbie level 1
Newbie level 1
Joined
Mar 16, 2017
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
I am designinging solar MPPT charger, in which solar panel voltage ranges from 100 to 180 and the battery is of 12V. Battery has to be charged by 2 modes stand-by(13.6V) and cyclic mode(1405V). I am using SEA05 controller for constant voltage and current. can anyone suggest me how to switch the mode to stand-by mode when battery is fully charge? and how can i limit the leakage current?
 

hello

give the limit of your mode values and compare it with the battery voltage value when it exceed the limit it will switch
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top