kritia
Newbie level 2
- Joined
- Sep 2, 2014
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 28
Hi,
I have an array of nanowires which are basically cuboid. They have length=1um, width=1um and height=1um covering an area of 36x36um located 10nm apart.
They are on a substrate of height 10um and area 48x48um.
When I change the height of the nanowire from 1um to 4um I see the error: Surface Recovery failure Possible reasons : (1) . model has multiple objects with thin layers (2) complex model with object overlapping (3)" True surfaces are skewed.
With 1um height the simulation works without any errors.
Please help.
I have an array of nanowires which are basically cuboid. They have length=1um, width=1um and height=1um covering an area of 36x36um located 10nm apart.
They are on a substrate of height 10um and area 48x48um.
When I change the height of the nanowire from 1um to 4um I see the error: Surface Recovery failure Possible reasons : (1) . model has multiple objects with thin layers (2) complex model with object overlapping (3)" True surfaces are skewed.
With 1um height the simulation works without any errors.
Please help.