HFSS problem with simulating a symmetrical circular Horn

Status
Not open for further replies.
S

saras

Junior Member level 3
Joined
Oct 26, 2004
Messages
27
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,283
Activity points
284
HFSS problem

dear everyone,
I've been simulating a symmetrical circular Horn with a symmetrical hyperboloid small subreflector placed along the z-axe. my problem is that while seeing the radiation pattern, the pattern at phi=90 is not the same as in phi=0, whereas the structure is symmetrical.the simulation has gone several passes and the meshing seems ok.
may anyone help me? what's the problem?
thanks and
good luck
sara
 

HFSS problem

i have met similar problems too. Once i simulated a symmetrical antenna, but the current on its surface is unsymmetrical. nothing can explain it.
 

Re: HFSS problem

Have you tried using surface approzimation on the curved surfaces ?
Select curved objects . Right Click->Assign Mesh Operaiton -> Surface Approximation. Change the normal angle from 22.5deg to 5deg or so.

Itai
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…