Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS post-processing-electric field isosurface contour

Status
Not open for further replies.
P

ptshao

Junior Member level 1
Junior Member level 1
Joined
Jan 30, 2007
Messages
19
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,446
Hi, guys, I have problems with ploting electric field in a set of contours. I tried field calculator to solve this, but the strange thing is that there is a Iso function in v9.0 field calculator, while no such isosurface funtion in v11 counterpart.

Could you please tell me how to draw a set of electric field contour in HFSS?
Thanks in advance!
 

Just plot the electric field as a scalar. Then double click on the scale (the box with the rainbow colors which says "E field" at the top) to get the settings for the field plot. Go to the "Plots" tab and change "IsoValType" to whatever you prefer.
 

    P

    ptshao

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top