Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HFSS port solver misbehaving for high loss tangents?

Status
Not open for further replies.
J

JoshCrow

Newbie level 1
Newbie level 1
Joined
Jul 17, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
I simulate a lot of lossy fluids using frequency-dependent materials in HFSS. Lately, I've discovered that whenever the dielectric loss tangent is set to 1.0 (unity) or greater, the port solver gives me nonsensical impedance and gamma values for my suspended microstrip design. It seems to happen anytime loss tangent gets to unity... which is the case for things like DI water, ethanol, etc. at microwave frequencies.
Anybody have a clue how to fix this problem?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top