Dec 11, 2012 #1 W wisnuaditomo Newbie level 1 Joined Nov 14, 2012 Messages 1 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,286 Hi all, I'm trying to use HFSS to create my 3D model and I was trying to validate it but there is a error message "non manifold edges found in GroundPlane" what does it means? Here by I attach my design model using HFSS Thanks in Advance! View attachment triangular DGS.zip
Hi all, I'm trying to use HFSS to create my 3D model and I was trying to validate it but there is a error message "non manifold edges found in GroundPlane" what does it means? Here by I attach my design model using HFSS Thanks in Advance! View attachment triangular DGS.zip
Dec 11, 2012 #2 vinoth8051 Full Member level 3 Joined Dec 21, 2009 Messages 178 Helped 67 Reputation 134 Reaction score 66 Trophy points 1,328 Location Delhi, Kanpur, Madurai, India Activity points 2,380 Hi wisnuaditomo, Problem is with how the triangle is formed. I have removed the subtraction of DGS objects from ground for easier viewing... Let us zoom the area which is highlighted... Observe that Box8 and Box9 is not forming the edge of triangle properly... So While Subtracting Box8 and Box9 from DGS13.... Instead of making perfect triangle, this forms two triangles connected each other at the tip... Solution: Adjust postion of Box8 and Box9 so that perfect triangle is formed. Hope this helps... Welcome to edaboard.com
Hi wisnuaditomo, Problem is with how the triangle is formed. I have removed the subtraction of DGS objects from ground for easier viewing... Let us zoom the area which is highlighted... Observe that Box8 and Box9 is not forming the edge of triangle properly... So While Subtracting Box8 and Box9 from DGS13.... Instead of making perfect triangle, this forms two triangles connected each other at the tip... Solution: Adjust postion of Box8 and Box9 so that perfect triangle is formed. Hope this helps... Welcome to edaboard.com