[SOLVED] HFSS 2022 R2 - Waveguide port configuration

Status
Not open for further replies.
G

Gilde

Newbie
Joined
Aug 17, 2022
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
30
Hi everybody.
Has anyone had the oppurtinity to do waveguides on HFSS2022 R2 ?
I'm trying to simulate a WR62 waveguide on the Student version of HFSS 2022 R2 but they changed the way to setup the waveports (like TE10 and TE01).
I'm used to HFSS 2021 R1 & R2 but i'm lost on this new release. I looked for the Ansys "help" pdfs : they seems outdated, the menus are not the same.


This is what i'm trying to do. When I right on one the rectangles to assign the port. (I do Assign excitation/Port/Waveport) this menu appears and it seems not relevant :

And by setuping with this menu the simulation drops right after the meshing :

Hope someone can help me.

Thanks a lot for your time,
Best regards,
Gilde
 

Solution
P
Welcome Gilde,

You are setting up your simulation as a Driven Terminal simulation rather than Driven Modal. From your description, it sounds like you want Driven Modal.

In the top menu, select HFSS->Solution Type and select "Modal" instead of "Terminal" under Options.
Sort by date Sort by votes
Welcome Gilde,

You are setting up your simulation as a Driven Terminal simulation rather than Driven Modal. From your description, it sounds like you want Driven Modal.

In the top menu, select HFSS->Solution Type and select "Modal" instead of "Terminal" under Options.
 

Upvote 1 Downvote
Solution
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…