Help with VCO simulation using SpectreRF

Status
Not open for further replies.
C

calcio

Newbie level 1
Joined
Feb 20, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
7
Currently i'm doing a project about RF VCO design, working frequency is 5.5G. I have designed the circuit, and transiant analysis can be done correctly.
But when i do pss, the error message "Zero Diagonal found in Jacobian at N* gate1"; i really don't understand what's the error about.
Anyone who knows this, can kindly help me?
thanks very much!
 

It means that you have some convergence problems. Check them out below..
- Your VCO starts by itself without any extra components ?
- Some convergence problems could be solved by connecting 1 G Ohm resistances to the ground.
-PSS doesn't like short circuited transistors or components for matching purposes..
-Use initial state for problematic nodes by using "simulation convergence aids"..
-Decrease accuracy levels..or resetup the simulation parameters.
-Use Gear2
Something like those...

GL
 
Reactions: BMTS81

    B

    BMTS81

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…