bgpradeep
Junior Member level 2
Hi All,
I would like to know what kind of input should be given to test the layout of Digital to Analog Converter efficiently. Right now i thought of giving an Sine input through ADC command available in the ELDO.
ADC_1 CLK IN B09 B08 B07 B06 B05 B04 EDGE=1 VTH=1.65 VHI=3.3 VLO=0 VINF=0 VSUP=3.3 TCOM=1NS TPD=10NS
where B09 ---B04 are the inputs to the DAC, the problem was when i checked these inputs(B09 ----B04) they were starting from 000000 but after 011111 it did not go to 100000 instead it continued with out change as 011111.
My Clock signal was PULSE(0 3.3 0 0.1NS 0.1NS 2.5Ns 5NS)
Please help me if i am wrong in giving the ADC.
Thanks
Pradeep
I would like to know what kind of input should be given to test the layout of Digital to Analog Converter efficiently. Right now i thought of giving an Sine input through ADC command available in the ELDO.
ADC_1 CLK IN B09 B08 B07 B06 B05 B04 EDGE=1 VTH=1.65 VHI=3.3 VLO=0 VINF=0 VSUP=3.3 TCOM=1NS TPD=10NS
where B09 ---B04 are the inputs to the DAC, the problem was when i checked these inputs(B09 ----B04) they were starting from 000000 but after 011111 it did not go to 100000 instead it continued with out change as 011111.
My Clock signal was PULSE(0 3.3 0 0.1NS 0.1NS 2.5Ns 5NS)
Please help me if i am wrong in giving the ADC.
Thanks
Pradeep