[help urgent] problem in interfacing the 8051 with relays

Status
Not open for further replies.
J

jjeevan007

Full Member level 5
Joined
Apr 13, 2012
Messages
310
Helped
44
Reputation
88
Reaction score
43
Trophy points
1,308
Location
bangalore
Activity points
2,782
hi to all,

i need help its urgent..........

i am interfacing the at89s52 with some 2 sensors and the 8 relays.......

i am using using port 0 to operate the relays and port 1 is interfaced with sensor..........

the code is fine but the problem is sometimes it executes the full code, sometimes half code sometimes it doesnt starts executing the code........

i dont what is the problem whether its due to power problem something else.......

regards
jjeevan
 

Don't use PORT 0, TRY THIS SAME PROGRAM IN PORT 2.

Check this
 

i am using a ir sensor to detect the object, but the ir sensor are getting saturated, they are giving logic 1 output always even no object is placed in front it...............
 

Which IR sensor are you using?

Many IR sensors give logic 1 output when "low" and 0 output when "high".
 

Tahmid said:
Which IR sensor are you using?

Many IR sensors give logic 1 output when "low" and 0 output when "high".
Click to expand...

sorry for the late reply
**broken link removed**

is the ir sensor board it gives logic high output when it detects the object.......

- - - Updated - - -

manoj madhavan said:
Can you post the schematic here?
Click to expand...


sorry i dont have the schematic of that......
 

Check the link

**broken link removed**
 

I think there is might be a Power problem. Check your Relay interfacing circuit. What is operating current of your relay?
 
Last edited:

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…