Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help to identify board .

Status
Not open for further replies.

leakweed

Newbie level 3
Newbie level 3
Joined
Jun 5, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
IMG_20140812_235131.jpgI scored this off the college dump . it has a pic18f 45k22 chip. It appears to be some sort of pin distribution board. But i can't identify the board model/ part no./ name. On the back is just written "SOL". On the front under the chip ie in between the socket hole is "CMP ET 12-08 ". Can anyone tell what this board is or called ?
 
Last edited:

The PIC is the only thing that particularly draws notice. It can be programmed to interact in electronic circuits, and in infinite number of ways.

One cannot predict what it was programmed to do. Nor can one be sure it still works.

The board is pretty much unpopulated except for a few components and connectors. It may have been found to be defective before it was fully assembled.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top