Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help to construct a Balun

Status
Not open for further replies.
P

ptmsl

Full Member level 1
Full Member level 1
Joined
Aug 1, 2005
Messages
99
Helped
16
Reputation
32
Reaction score
5
Trophy points
1,288
Activity points
2,643
I need to construct a Balun to connect a 100R balanced line (an ADSL line) to 50R unbalanced in order to measure the Power spectral density of an ADSL interface with a 50R Spectrum Analyzer. The spectrum I am intrested in is betwen 10KHz and 10MHz or more. I prefer not to wind my own coil (maybe use an ADSL transformer?) and use off the shelf components. Can you help?
 

Minicircuits makes many transformers. They will sell them in quantities of one and you can order by telephone with a credit card.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top