Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

help to Choix mosfet driver

Status
Not open for further replies.
M

minhlam

Member level 2
Member level 2
Joined
Nov 15, 2004
Messages
48
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
323
Dear All..
Please help me to choice a chip driver mosfet eg TC4427 . IR2110.. or other..../. for suitable (power) with my circuit mini SSTC Half-Bridge (tesla coil) 100 watt at 100 volts Thank you so much.
lam
 
Last edited:

You must firstly determine what the SMPS topology will be adopted, and just after perform selection of the most suitable MOSFET driver. Both devices you posted above refers to applications based on different concepts. For instance, IR2110 is applied at Half-Bridge designs, whereas TC4427 could be applied for example at Flyback ones.



+++
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top