help on characteristic impedance

Status
Not open for further replies.
T

tieuquaybk

Member level 4
Joined
Apr 30, 2005
Messages
75
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,824
in most datasheet that i read ( for ex. LNA9M403 ) , used PCB FR4 with ε = 4.6 ,h = 0.5 mm W = 0.5 mm and they said that the characteristic impedance of microtrip is 50 0hm . But after using all formulas for microtrip , i can't get that value . Can someone tell me how to obtain it .
 

with the following formula you get close to 50 (about 45) with ε = 4.6.
Check ´Signal Integrity Issues and Printed Circuit Board Design´
By Douglas Brooks (I´ve downloaded it from this board I think) Just post me if you can´t find it.
 

hi! thank dpsman for replying
oh ,this mean that T is sizeable (maybe in this case T= 0.5 mm = H = W !! ) . Just because i don't know exactly the thickness of copper T ,and used the value of 18 - 36 µm which is << 0.5 mm (i found this value by searching on google ) .
Once more question is : how to make connection between components on microwave frequency ? as i see ,it use microstrip too . But still have some dout on it . And if we use the microstrip ,then its lenght and width are choosen by which standard ? and how it affect on circuit matching
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…