Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help! On 3-phase current calculation.

Status
Not open for further replies.
yzou_ua

yzou_ua

Member level 5
Member level 5
Joined
Nov 5, 2008
Messages
92
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,869
Here r the given parameters:

3-phase generator outputs: 480V rms line-to-line voltage; 275kVA;

How 2 calculate the output line-to-line current (rms)?
& how 2 calculate the output phase current (rms)?

I just be confused about the relationship bet. them ......:cry::cry:
 

your 3phase formula is E x I x sqrt(3) = VA. With that you can find your line current. Your phase current is dependant on the arrangement of your coils, but at 480 your likely in Delta, so Iphase current is Iline / sqrt(3).
 

Thank you so much! Pretty clear and helpful explanations!!


GetDeviceInfo said:
your 3phase formula is E x I x sqrt(3) = VA. With that you can find your line current. Your phase current is dependant on the arrangement of your coils, but at 480 your likely in Delta, so Iphase current is Iline / sqrt(3).
Click to expand...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top