Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

HELP NEEDED WITH ORCAD PCB EDITOR

Status
Not open for further replies.
usman_mahfooz

usman_mahfooz

Member level 2
Member level 2
Joined
Aug 19, 2006
Messages
50
Helped
3
Reputation
8
Reaction score
2
Trophy points
1,288
Location
PAKISTAN
Activity points
1,583
Following are the files
Can somebody tell me how to import them into Orcad Pcb editor
 

You need to select File > Import > Artwork.
I assume you are aware these are gerber files, I've never seen gerber imported successfully into an ECAD system, good luck!
 

I use a gerber viewer called GCPrevue - you'll be able to look at the data with a viewer, take measurements & print out the layers but you won't be able to manipulate the data, you 'll need a gerber editor like CAM350 to do that.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top